Long Range Wireless Access Point / Client Bridge
Manually Set Date and Time: Specify the date and time
Automatically Get Date and Time: Select the time zone from the drop down list
and then specify the IP address of the NTP server.
Click on the Apply button to save the changes.
4.5.6 Log
Click on the Log link under the Management menu. The Log page displays a list
of events that are triggered on the Ethernet and Wireless interface. This log can
be referred when an unknown error occurs on the system or when a report
needs to be sent to the technical support department for debugging purposes.
Syslog: Choose to enable or disable the system log.
Log Server IP Address: Specify the IP address of the server that will receive the
system log.
Local Log: Choose to enable or disable the local log.
Click on the Apply button to save the changes.
Version 1.0
27