Snmp Settings - EnGenius EWS860AP The Neutron Series User Manual

SNMP Settings

This page allows you to assign the Contact Details, Location, Community Name, and Trap Settings for Simple Network Management Protocol (SNMP). This is a
networking management protocol used to monitor network attached devices. SNMP allows messages (called protocol data units) to be sent to various parts of the
network. Upon receiving these messages, SNMP compatible devices (called agents) returns the data stored in their Management Information Bases. To configure
SNMP Settings, click under the Advanced tab on the side bar under Management.
Status: Enables or Disables the SNMP feature.
Contact: Specifies the contact details of the device.
Location: Specifies the location of the device.
68