Local Private Network Name; Remote Private Network Name - Aztech HL113 E User Manual

User Manual

Local Private Network Name

Local Private Network Name refers to the Private Network Name of the HomePlug AV that is
directly connected to the computer where you use HomePlug AV Utility.
To change the local Private Network Name:
1. Open HomePlug AV Utility.
2. Click Private Network Name.
3. Type the new Private Network Name. This field is case sensitive. It accepts 8 to 64
alphanumeric characters including punctuation marks but no spaces.
4. Click Apply. When the process is complete, the message Settings Applied appears.

Remote Private Network Name

Without leaving your computer, you can change the Private Network Name of remote HomePlug AV
devices, provided they are using the same Private Network Name as your local HomePlug AV. You
cannot change the Private Network Name of remote devices that is not currently networked with
your local HomePlug AV.
Note: When changing the Private Network Name of remote devices, you will need the Device ID
that appears on the label pasted on the device. It will be more helpful if you list down the Device
ID of all your HomePlug AVs to enable you to remotely change their settings using the HomePlug AV
Utility software.
To change the Private Network Name of a remote HomePlug AV:
1. Open HomePlug AV Utility.
2. Click Private Network Name.
3. Type the new Private Network Name. This field is case sensitive. It accepts 8 to 64
alphanumeric characters including punctuation marks but no spaces.
4. Select Change Private Network Name of remote device.
Page 34 of 40