Aztech HL117EP Easy Start Manual

DEVICES ARE PLUG
AND PLAY READY.
A
Package Contents
The following items are included in your HL117EP package.
HL117EP Ethernet
Cable
B
Device Overview
Power LED
Powerline
Activity LED
Ethernet
Activity LED
HomePlug AV devices are preconfigured with a common Private Network Name. Adding new HomePlug AV devices to an existing
network with the default Private Network Name is as easy as plugging the device into the power outlet. If you wish to have a unique
private Network Name, simply follow the instructions below. This Easy Start Guide, the User Manual, and the HomePlug AV Utility
software is included in the Resource CD and is also downloadable on our Aztech Support Website (www.aztech.com/support).
Resource CD Easy Start Warranty
Guide Policy
You may use this AC Pass-through
as an extra power outlet.
MODEL
HL117EP
C Setting up your HomePlug AV Network
Step 1
In Room A, plug in your HomePlug AV device into the power outlet
and connect it to the router using an Ethernet cable.
NOTE: Ensure that your router's internet connection is UP to allow
Ethernet
access to the internet.
Ports 1&2
Step 2
In Room B plug in your other Homeplug AV device into the power
outlet and connect it to your computer's ethernet port using an
Ethernet cable.
Step 3
Simple
Confirm that a connection has established on both HomePlug AV
Connect
Button
devices. All 3 LEDs (Power
must be ON. Your Homeplug AV Network is now ready to use and
can access Internet.
, Powerline , and Ethernet )