Joining An Existing Secured Homeplug Av Network - Aztech HL113 E User Manual

User Manual

Joining an Existing Secured HomePlug AV Network

To enable a new device to join an existing network, Simple Connect will copy the Private Network
Name of the existing network to the new HomePlug AV. If you pressed Simple Connect from
multiple HomePlug AVs, only the signal from the first two devices will be processed.
To join an existing Secured HomePlug AV network using Simple Connect:
Step 1
Plug HomePlug AV Z beside one of your existing HomePlug AV device. Make sure you can easily
observe the LED behavior.
Upon connection, HomePlug Z's LEDs will blink simultaneously and then the Power LED lights ON
steadily. Ethernet LED will be ON if there is an ethernet link.
Page 17 of 40