Pairing The Device - Aztech HL113 E User Manual

Pairing the Device

Your HomePlug AV devices by default are preconfigured to have a common Private Network Name.
Setting up your HomePlugAV network is as easy as 1, 2 and 3.
1. Plug in your HomePlugAV devices side by side to easily observe the LED behavior. Wait until
the Power and PL-ACT LED turns ON to confirm that the connection has been established.
Location A
2. In Location A plug in your HomePlugAV into the wall socket then connect it to your
Modem/Router's Ethernet LAN port using an Ethernet cable.
3. In Location B plug in your HomePlugAV into the wall socket then connect it to your
computer's Ethernet Port using an Ethernet cable. Your HomePlugAV is now ready to use.
User Manual
Location B
Page 9 of 40