Aztech HL113 E User Manual page 8

User Manual
Label
Power LED
Powerline Activity
B
Ethernet Activity
C
Ethernet Port
D
Simple Connect
Button /
Reset Button
E
Page 8 of 40
Status Description/ Function
Off No power.
On When LED is on steady green color, and
Powerline Activity and Ethernet LED is
ON/OFF (Ethernet is connected /
disconnected), HomePlugAV is on a Power
Saving Status.
Off Device is not connected to a HomePlug AV network.
On After Simple Connect is pressed for 2-4
seconds, this LED will blink to confirm the
button press.
When Simple Connect is pressed for 5-8
seconds, this LED will turn OFF and turn ON
to confirm the Private Network Name reset.
This LED is blinking in green color when the
device is part of a HomePlug AV network.
The LED colors represents the connection
rate within the HomePlug AV network
whether it is good (red), better (amber), or
best (green).
The LED flashes to indicate network
activity.
Off An Ethernet device is not connected.
On This LED is blinking when an Ethernet
device is connected.
When Simple Connect is pressed for 5-8
seconds, this LED will turn OFF and turn ON
to confirm the Private Network Name reset.
The LED flashes to indicate Ethernet
activity.
Accepts either cross or straight Ethernet cable.
Press to create or join a HomePlug AV network. It
can also be used to reset the Private Network Name
to a random key.
When Simple Connect is pressed for 5-8 seconds, it
will randomize the Private Network Name.
Press for 10-13 seconds to reset to the factory
default settings. When you reset to the factory
default, all your configuration changes will be
removed.