For Single Pack - Aztech HL113 E User Manual

User Manual

For Single Pack

A HomePlug AV from a single pack uses a random Private Network Name that prevents it from
communicating with other HomePlug AVs. To add it into an existing network, you need to use either
the Simple Connect button or the HomePlug AV Utility software to change the random Private
Network Name to the Private Network Name being used by the existing HomePlug AV network.
To add a HomePlug AV to an existing network:
1. Plug one end of the Ethernet cable to your Ethernet device and then connect the other end
to HomePlug AV.
2. Connect the HomePlug AV to a wall socket.
3. Add the new HomePlug AV by using either Simple Connect or the HomePlug AV Utility
software. To use Simple Connect, please refer to
To use HomePlug AV Utility, please refer to
Page 28 of 40
Joining an Existing HomePlug AV
Private Network Name.
Network.