Aztech HL113 E User Manual page 18

User Manual
Step 2
Press Simple Connect for 5-8 seconds from a HomePlug AV Z. After you release the button, All LED
will blink. The Power LED will stay ON.
Note: If the all LED did not blink, press Simple Connect again.
Step 3
Press Simple Connect Button for two seconds on the existing HomePlug AV device. After you
release the button, the Power LED will continuously blink. If the Power LED did not blink,
press Simple Connect again for two seconds.
Make sure to press Simple Connect Button again on the HomePlug AV Z within two minutes
after you press Simple Connect from the existing network.
Page 18 of 40