Aztech HL113EW Easy Start Manual

A
Package Contents
- HL113EW
- Ethernet Cable
- Resource CD
B
Device Overview
WPS Button /
Wireless LED
Power LED
Easy Start Guide
HL113EW | HomeplugAV 200 Mbps with WiFi
Ethernet Ports
C
Setup for New Network Connection
- Easy Start Guide
- Warranty Card
1. In Room A, plug in your HomePlug AV device into the
power outlet and connect it to your router's ethernet
Ethernet LED
port using an ethernet cable.
Power Line
Activity LED
Make sure that your router's internet connection is
up to allow you to access the internet.
Simple Connect Button
D
Configuring Wireless Settings (Optional)
2. In Room B, plug in your HL113EW device into the
Ensure to follow the connection set up below.
power outlet. You may connect any device (e.g.
computer / notebook) to its ethernet port; you may
also connect any of your wireless devices via WiFi
(SSID and Password is printed at the label sticker
located at the top surface of your HL113EW).
3.
Confirm that the connection was established on
1. Connect an ethernet cable from the PC to any of the
both Home Plug AVs. Successful connection is
Ethernet Ports of the HL113EW.
indicated by Green light on both Power and Power
2. On your computer, turn off Wireless Adapter (if
Line Activity LEDs. Your Homeplug AV is now ready
applicable).
for use and may now access the internet.
3. Open and Launch a web browser. Type in 10.0.10.254
on the web browser's url link then hit enter key.
4. Enter 'admin' for Username and 'admin' for
Password.
5. Select the Wireless tab to modify the wireless
settings.
6.
After changing the preferred settings, click Apply to
save.