Local Private Network Name; Remote Private Network Name - Aztech HL110E User Manual

User Manual

Local Private Network Name

Local Private Network Name refers to the Private Network Name of the HomePlug AV
that is directly connected to the computer where you use HomePlug AV Utility.
To change the local Private Network Name:
1. Open HomePlug AV Utility.
2. Click Private Network Name.
3. Type the new Private Network Name. This field is case sensitive. It accepts 8 to 64
alphanumeric characters including punctuation marks but no spaces.
4. Click Apply. When the process is complete, the message Settings Applied appears.

Remote Private Network Name

Without leaving your computer, you can change the Private Network Name of remote
HomePlug AV devices, provided they are using the same Private Network Name as your
local HomePlug AV. You cannot change the Private Network Name of remote devices that
is not currently networked with your local HomePlug AV.
Note: When changing the Private Network Name of remote devices, you will need the Device ID that Note: Note: Note:
appears on the label pasted on the device. It will be more helpful if you list down the Device ID of all your
HomePlug AVs to enable you to remotely change their settings using the HomePlug AV Utility software.
To change the Private Network Name of a remote HomePlug AV:
1. Open HomePlug AV Utility.
2. Click Private Network Name.
3. Type the new Private Network Name. This field is case sensitive. It accepts 8 to 64
alphanumeric characters including punctuation marks but no spaces.
4. Select Change Private Network Name of remote device.
Page 28 of 40