Local Private Network Name; Remote Private Network Name - Aztech 500Mbps 4-Port HomePlugAV Ethernet Adaptor User Manual

User Manual

Local Private Network Name

Local Private Network Name refers to the Private Network Name of the HomePlugAV that
is directly connected to the computer where you use HomePlugAV Utility.
To change the local Private Network Name:
1. Open HomePlugAV Utility.
2. Click Private Network Name.
3. Type the new Private Network Name. This field is case sensitive. It accepts 8 to 64
alphanumeric characters including punctuation marks but no spaces.
4. Click Apply. When the process is complete, the message Settings Applied appears.

Remote Private Network Name

Without leaving your computer, you can change the Private Network Name of remote
HomePlugAV devices, provided they are using the same Private Network Name as your
local HomePlugAV. You cannot change the Private Network Name of remote devices that
is not currently networked with your local HomePlugAV.
Note: Note: When changing the Private Network Name of remote devices, you will need the Device ID that Note: Note:
appears on the label pasted on the device. It will be more helpful if you list down the Device ID of all your
HomePlugAVs to enable you to remotely change their settings using the HomePlugAV Utility software.
To change the Private Network Name of a remote HomePlugAV:
1. Open HomePlugAV Utility.
2. Click Private Network Name.
3. Type the new Private Network Name. This field is case sensitive. It accepts 8 to 64
alphanumeric characters including punctuation marks but no spaces.
4. Select Change Private Network Name of remote device.
Page 30 of 42