Creating A Secured Homeplug Av Network - Aztech HL113 E User Manual

To reset the Private Network Name using Simple Connect:
Step 1
Press Simple Connect button for 5-8 seconds
and release after press. The Power LED
remains steady green.
Activity LED and Ethernet will switch OFF
and ON (Ethernet is connected).

Creating a Secured HomePlug AV Network

To create a HomePlug AV network, you need at least two HomePlug AV devices using random
Private Network Names. When you press Simple Connect for 10-13 seconds on both devices, a
common Private Network Name will be automatically generated to enable them to communicate
with each other.
Note: New HomePlug AV can already communicate with each other out of the box. However, if you
intend to create a new Private Network Name using Simple Connect for both devices, you need to
reset their Private Network Names to a random key before proceeding.
The Powerline
Step 2
On the second adapter, Press the Simple
Connect button for 2 seconds and do it on the
first adapter to pair
Powerline Activity LED will blink to indicate
that the button is pressed.
User Manual
the devices. The
Page 11 of 40