Emergency Call - Icom IC-F8100 Instruction Manual

4
SELCALL/ALE OPERATION
ï Emergency call
The Emergency call allows you to broadcast an emer-
gency signal with your own position information.
• Sending an Emergency call
q With the Memory Channel displayed, push [
enter the Call select menu.
w Push [t](§) or [u](§§§) to set the Call to "SEL-
CALL," then push [
e Push [t](§) or [u](§§§) to set the Call type to
"EMERGENCY."
• "SELECTIVE," "PHONE," "MESSAGE," "SEND PO-
SITION," "GET POSITION," "GET STATUS," "EMER-
GENCY" and "CHANNEL TEST" are selectable.
r Push [ ] to go to the next screen.
• Push [HOME] to return to the previous screen.
❍ Call ID input
Push the numeric keys to enter the Call ID.
• Push [8] to delete the number.
• This Call ID is not stored in the Call ID list.
❍ Call ID selection
➥ Push [List](§ § ) to enter the list selection
mode.
➥ Push [t](§) or [u](§§§) to select the Call ID.
• Push [Edit](§ § ) to return to the direct input
mode.
t Push [ ] to go to the next screen.
• Push [HOME] to return to the previous screen.
❍ Network selection
Push [t](§) or [u](§§§) to select the Network.
29
] to enter the Selcall menu.
y Push [ ] to go to the next screen.
• Push [HOME] to return to the previous screen.
❍ Self ID selection
Push [t](§) or [u](§§§) to select the Self ID.
] to
❍ Self ID input
➥ Push [Edit](§§) to enter the direct input mode.
➥ Push the numeric keys to enter the Self ID.
• Push [8] to delete the number.
• This Self ID is overwritten or stored in the Self ID
list.
• Push [List](§§) to return to the list selection mode.
u Push [ ] to enter the Channel Menu, and then
push [t](§) or [u](§§§) to select the desired operat-
ing channel.
• Push [HOME] to return to the Selcall menu.
i Push [ ] to transmit the Emergency call. The call
is stored in the Call Out memory.
• While calling, push [PTT] to cancel the call.
You can also transmit an Emergency call when the
Selcall Address is displayed. In this case, you can
skip steps q to t above, after selecting the Emer-
gency call address.
• Receiving an Emergency Call
When your transceiver receives an Emergency Call
with your individual ID, it automatically responds by
transmitting. The received Emergency Call is stored in
the Call In memory.
q After receiving a Emergency call, push any key to
enter the Call In memory.
w Push [More](§§§) or [Prev](§) to select the informa-
tion.
e Push [HOME] to return to normal operating
screen.