Icom IC-F8100 Instruction Manual page 26

4
SELCALL/ALE OPERATION
ï Phone call
Allows you to make Phone calls through a telephone
interconnect service provider.
• Preparation for a Phone call
Send a Channel Test call on several Phone call chan-
nels, and check the propagation on each one to select
the channel with the best signal quality. (p. 30)
• Sending a Phone call
q With the Memory Channel displayed, push [
enter the Call select menu.
w Push [t](§) or [u](§§§) to set the Call to "SEL-
CALL," then push [
e Push [t](§) or [u](§§§) to set the Call type to
"PHONE."
• "SELECTIVE," "PHONE," "MESSAGE," "SEND PO-
SITION," "GET POSITION," "GET STATUS," "EMER-
GENCY" and "CHANNEL TEST" are selectable.
r Push [ ] to go to the next screen.
• Push [HOME] to return to the previous screen.
❍ Phone number input
Push the numeric keys to enter the Phone num-
ber.
• Push [8] to delete the number.
• This Number is not stored in the Phone address list.
❍ Phone address selection
➥ Push [List](§ § ) to enter the list selection
mode.
➥ Push [t](§) or [u](§§§) to select the Phone
address.
• Push [Edit](§ § ) to return to the direct input
mode.
21
] to enter the Selcall menu.
t Push [ ] to go to the next screen.
• Push [HOME] to return to the previous screen.
❍ Phone Link selection
Push [t](§) or [u](§§§) to select the Network.
] to
❍ Phone Link input
➥ Push [Edit](§ § ) to enter the direct input
mode.
➥ Push the numeric keys to enter the Phone
Link.
• Push [8] to delete the number.
• This Phone Link is not stored in the Phone Link
list.
• Push [List](§ § ) to return to the list selection
mode.
y Push [ ] to go to the next screen.
• Push [HOME] to return to the previous screen.
❍ Network selection
Push [t](§) or [u](§§§) to select the Network.
u Push [ ] to go to the next screen.
• Push [HOME] to return to the previous screen.
❍ Self ID selection
Push [t](§) or [u](§§§) to select the Self ID.
❍ Self ID input
➥ Push [Edit](§ § ) to enter the direct input
mode.
➥ Push the numeric keys to enter the Self ID.
• Push [8] to delete the number.
• This Self ID is overwritten or stored in the Self ID
list.
• Push [List](§ § ) to return to the list selection
mode.