Icom IC-F8100 Instruction Manual page 50

5
MENU SCREEN
Admin Menu items (Continued)
D
ALE LQA Average
Set the adopting number of LQA data for averaging to
between 1 and 8.
ALE LQA Request
Set the LQA request function to ON or OFF.
When set to ON, the transceiver requests the called
station to send LQA data with an ALE answer back
call.
ALE Scan Call Time
Set the registration of the scan channel number for
your group to set the ALE calling times. Selectable
number are 1 to 100, in 1 digit steps, or AUTO.
AUTO: The same setting as your scan channels.
RFDS TX Time
Set the time period of the RFDS call emission length
to between 10 and 60 seconds, in 1 second steps.
Emer Link Interval
Set the interval time period of the Emergency Link
function to between 10 and 300 seconds, in 10 sec-
onds steps.
The transceiver will sequentially send a Selcall to the
specified stations.
Advanced User Menu
Set the Advanced User Menu to ON or OFF.
When set to ON, the following additional set items
appear in the User Menu: Blanker Level, AGC,
Bandwidth, Clarifier, Pre Amp, Speech Processor,
Processor Level, Key Lock and Side Tone Level.
45
(Default: 8)
(Default: ON)
(Default: AUTO)
(Default: 30sec)
(Default: 120sec)
(Default: OFF)