ï RFDS emergency call (only AUS versions)
The RFDS (Royal Flying Doctor Service) emergency
call uses a 2-Tone signal for an emergency call.
• Sending an RFDS emergency call
q With the Memory Channel displayed, push [
enter the Call select menu.
w Push [t](§) or [u](§§§) to set the Call to "SEL-
CALL," then push [
] to enter the Selcall menu.
e Push [t](§) or [u](§§§) to set the Call type to
"RFDS EMERGENCY."
• "SELECTIVE," "PHONE," "MESSAGE," "SEND PO-
SITION," "GET POSITION," "GET STATUS," "EMER-
GENCY," "CHANNEL TEST" and "RFDS EMERGENCY"
are selectable.
r Push [
] to enter the Channel Menu, and then
push [t](§) or [u](§§§) to select the desired operat-
ing channel.
• Push [HOME] to return to the Selcall menu.
t Push [
] to transmit the RFDS emergency call.
The call is stored in the Call Out memory.
• While calling, push [PTT] to cancel the call.
You can also transmit an RFDS emergency call
when the Selcall Address is displayed. In this case,
you can skip steps q to e above, after selecting
the RFDS emergency call address.
] to
SELCALL/ALE OPERATION
4
4
28
Need help?
Do you have a question about the IC-F8100 and is the answer not in the manual?