Motional Surround; Common Tab; Part Tab; Control Tab - Roland Integra-7 Parameter Manual

MOTIONAL SURROUND

1.
[MOTIONAL SURROUND]
Press the
2.
Press the [ENTER] button .
Parameter

COMMON tab

Room Type
Room Size
Motional Surround Depth
Ambience Level
Ambience Time
Ambience Density
Ambience HF Damp

PART tab

Part L-R
Part F-B
Part Width
Part Ambience Send Level

CONTROL tab

Ext Part Control Ch
button .
Value
ROOM1, ROOM2, HALL1, HALL2
SMALL, MEDIUM, LARGE
0–100
0–127
0–100
0–100
0–100
-64–+63
-64–+63
0–32
0–127
1–16, OFF
Explanation
Specifies the room type .
Specifies the room size .
Specifies the depth of the Motional Surround effect .
Specifies the volume of ambience .
Specifies the duration of ambience .
Specifies the density of ambience .
Specifies the frequency at which the high range of the ambience will be cut .
Specifies the left/right position .
Control change number
• 1–16 Part : CC12
•
Ext Part : CC28
Specifies the front/rear (back) position .
Control change number
•
1–16 Part : CC13
• Ext Part : CC29
Specifies the width of the positioned sound .
Specifies the send level to ambience
Control change number
•
1–16 Part : CC14
• Ext Part : CC30
Specifies the MIDI channel used when controlling the front/back/left/right position and ambience
send level of an Ext part via MIDI .
Studio Set –
COMMON tab
11