Studio Set Effects; Comp+Eq Output Tab; Chorus Tab; Reverb Tab - Roland Integra-7 Parameter Manual

STUDIO SET EFFECTS

1.
In the EFFECTS ROUTING screen, move the cursor to the effect that you want to edit, and press the
* MFX and COMP+EQ can be set individually for each tone .
Parameter

COMP+EQ OUTPUT tab

Comp+EQ 1 Output Assign
Comp+EQ 2 Output Assign
Comp+EQ 3 Output Assign
Comp+EQ 4 Output Assign
Comp+EQ 5 Output Assign
Comp+EQ 6 Output Assign

CHORUS tab

*
This is ignored if motional surround is on .
Chorus Switch
Chorus Type
Chorus Parameter
Chorus Level
Chorus Output Assign
Chorus Output Select

REVERB tab

* This is ignored if motional surround is on .
Reverb Switch
Reverb Type
Reverb Parameter
Reverb Level
Reverb Output Assign
Value
PART, A, B, C, D, 1–8
OFF, ON
00: OFF
01: Chorus
02: Delay
03: GM2 Chorus
-
0–127
A, B, C, D
MAIN, REV, MAIN+REV
OFF, ON
00: OFF
01: Room 1
02: Room 2
03: Hall 1
04: Hall 2
05: Plate
06: GM2 Reverb
-
0–127
A, B, C, D
Explanation
Specify the output destination for each the six drum kit compressor + equalizer units .
PART: Input to the MFX of the part .
A, B, C, D: Output in stereo to the OUTPUT A (MIX) jacks or the OUTPUT B, C, D jacks .
1–8: Output in monaural to the INDIVIDUAL 1–8 jacks .
* If motional surround is on, the output from each compressor + equalizer will always be the MFX
of the part, regardless of the COMP+EQ Output Assign setting .
Switches the chorus on/off .
*
This is ignored if motional surround is on .
Selects the types of chorus .
Choose "00: OFF" if you don't want to apply a chorus .
Edit the parameters for the selected chorus type .
"Chorus Parameters"
Refer to (p . 98) .
Adjusts the volume of the sound that has passed through chorus .
Selects the pair of OUTPUT jacks to which the chorus sound is routed when Chorus Output Select
is set to "MAIN" or "MAIN+REV."
Specifies how the sound routed through chorus will be output .
MAIN: Output in stereo to the OUTPUT jacks .
REV: Output in monaural to the reverb .
MAIN+REV: Output in stereo to the OUTPUT jacks, and in monaural to the reverb .
Switches the reverb on/off .
*
This is ignored if motional surround is on .
Selects the types of reverb .
Choose "00: OFF" if you don't want to apply a reverb .
Edit the parameters for the selected reverb type .
Refer to "Reverb Parameters" (p . 98) .
Adjusts the volume of the sound that has passed through reverb .
Specifies how the sound routed through reverb will be output .
A, B, C, D: Output in stereo to the OUTPUT A (MIX) jacks or the OUTPUT B, C, D jacks .
Studio Set –
COMP+EQ OUTPUT tab
[ENTER] button .
13