Supernatural Drum Kit (Sn-D); Tone Edit (Sn-D); Common Tab; Drum Inst Tab - Roland Integra-7 Parameter Manual

SuperNATURAL Drum Kit (SN-D)

TONE EDIT (SN-D)

Each kit has settings for 62 drum instruments, in addition to multi-effect (MFX) settings .
You can assign a different note number that will sound each of the 62 partials .
For the one part specified by the Drum Comp+EQ Assign setting, you'll be able to use six sets of compressor + equalizer units to make the sound more
consistent or to adjust the tonal character .
PARTIAL 62
PARTIAL 1
DRUM INST
1.
In the top screen, press the
Parameter

COMMON tab

Phrase Number
Drum Kit Level
Ambience Level

DRUM INST tab

Inst Bank
Inst Number
Level
Pan
Chorus Send Level
Reverb Send Level
Tune
Attack
Decay
Brilliance
Variation
Dynamic Range
Stereo Width
COMP+EQ 1 COMP+EQ 4
COMP+EQ 2 COMP+EQ 5
COMP+EQ 3 COMP+EQ 6
[EDIT] button .
Value
0–16
0–127
0–127
INT,
ExSN6
(only if an expansion is loaded)
000: OFF, 001–
0–127
L64–63R
0–127
0–127
-120–+120
0–100 [%]
-63–0
-15–+12
OFF, FLAM1, FLAM2, FLAM3, BUZZ1,
BUZZ2, BUZZ3, ROLL
0–63
0–127
MFX
Explanation
Number of the phrase that plays when you press the
Sets the volume of the entire drum kit .
Specifies the volume of the drum kit resonances and the resonances of the room . This applies only
for sounds whose type is Kick, Snare, Tom, and Hi-Hat .
* For some drum instruments, this will have no effect . Refer to
(p . 41) .
Selects the drum inst bank assigned to partial .
INT: Internal inst bank
ExSN6: Expanded inst bank
Selects the drum inst number assigned to partial .
Sets the volume of the drum inst .
Sets the pan of the drum inst .
Specifies the level of the signal sent to the chorus for each drum inst .
* This has no effect if motional surround is on .
Specifies the level of the signal sent to the reverb for each drum inst .
* This has no effect if motional surround is on .
Adjusts the pitch of the drum inst .
Adjusts the level and time of the attack . A setting of 100% produces the fastest attack .
Adjusts the decay time . Negative "-"
Adjusts the brilliance of the sound . Positive
settings make the sound darker .
Specifies performance variations such as flam, buzz, or roll .
*
The parameters available for editing will depend on the drum instrument . Refer to
"SuperNATURAL Drum Inst List"
Specifies the curve by which velocity will affect the volume . With a setting of 0, any velocity will
produce the maximum volume .
Adjusts the stereo width of the sound . A setting of 0 is monaural .
*
For some drum instruments, this will have no effect . Refer to
(p . 41) .
[VOLUME] knob (PREVIEW) .
"SuperNATURAL Drum Inst List"
settings will produce a muting effect .
"+"
settings make the sound brighter, and negative
(p . 41) .
"SuperNATURAL Drum Inst List"
"-"
39