Stairmaster StepMill 7000 Owner's Manual page 37

7000 PT CONSOLE
Quick Scan Programming
You can quickly access any of the custom menus by pressing [LEVEL: ^],
[4], [ENTER]. The console will then display "MACHINE STATUS." Scroll through
the following options:
[ SELECT ]
[ SELECT ]
[ SELECT ]
[ SELECT ]
[ SELECT ]
[ SELECT ]
[ SELECT ]
Resetting the Maintenance Hour Counter
For ease of maintenance records, the Stepmill
that will clock the number of hours, workouts, and time between last servicing.
After each maintenance period reset the counter.
[ ^ ] [ 7 ] [ 1 ] Reset Service
1. Reset the maintenance hour counter by pressing [LEVEL: ^], [7], [1]. The
console will dusplay "RESET SERVICE." Press [ENTER]. The console will
display "DONE." Press [CLEAR] to return to the starting screen.
Configuration Code
The Stepmill console supports other StairMaster
important to verify that the machine configuration code matches the type of
machine you have. Speed control problems, along with other problems, can occur
if the console is not set up correctly.
[ ^ ] [ 8 ] [ 0 ] Change Machine
1. Change the machine type by pressing [LEVEL: ^], [8], [0]. The console will
display "CHANGE MACHINE." Press [ENTER]. The console will then display
the current machine type. Use the [SELECT] key to toggle between
options. Press [ENTER] for the desired option.
Page 30
" RUN HOURS
" WORKOUTS
" DISTANCE
" CONS 90211- XXX "
" STEPMILL"
-N/A-
" MAINT HOURS xxxx"
XXXX" 0
XXXX" 1
XXXX" 2
3
4
6
®
console has a maintenance timer
®
exercise systems. It is