Stairmaster StepMill 7000 Owner's Manual page 12

TO REDUCE THE RISK OF ELECTRICAL SHOCK AND FIRE AND TO PREVENT SEVERE
DAMAGE TO THE MACHINE, USE ONLY THE POWER SUPPLY APPROVED FOR USE
WITH THIS EQUIPMENT. IN ADDITION, YOUR MACHINE MUST BE
9. Connect the AC power cord to the AC wall outlet. Refer to the "Grounding
Instructions" section of the Manual if the AC wall outlet does not
accept a three-prong plug.
10. Watch the console. The console should display a software revision code and
then show "SELECT WORKOUT." If it does not, unplug the power supply and
then plug it back in. If the sound and/or the display are still not present,
contact the Customer Service Department at 800-331-3578. International
customers should call their local distributor; refer to the Appendix for the
phone number of the office nearest you.
11. When the console displays "SELECT WORKOUT", your Stepmill
7000 PT exercise system is ready to use.
12. Custom-length DC cables and other accessories are available. Refer to the
Appendix for the phone number of the office nearest you.
INSTALLATION INSTRUCTIONS
!
WARNING
PROPERLY GROUNDED.
®
Page 5