Stairmaster StepMill 7000 Owner's Manual page 35

7000 PT CONSOLE
2. Change the units to either Metric or USA units by pressing [LEVEL: ^], [3],
[1], [ENTER]. The console will display the current units - either "USA
UNITS" or "METRIC UNITS." Use the [SELECT] key to change option, and
then press [ENTER].
3. Choose the desired heart rate input preference by pressing [LEVEL: ^],
[3], [2]. The console will then display "HR INPUTS." Press [ENTER]. The
console will then display the current hear rate input selection. Press the
[SELECT] key to scroll through the other options. Press [ENTER] after the
desired option.
4. Change the language by pressing [LEVEL: ^], [3], [4]. The console will
display "LANGUAGE." Press [ENTER]. The console will then display
the current language. Press the [SELECT] key to scroll through the other
options. Press [ENTER] to change the option.
5. Adjust the contrast on the LCD screen by pressing [LEVEL: ^], [3], [5]. The
console will display "CONTRAST ADJ." Press [ENTER]. The console will
then display the current contrast number. Press the [LEVEL: ^], and
[LEVEL: ] keys to increase or decrease the contrast. The changed value
will remain on exit.
6. Reset the console to factory defaults by pressing [LEVEL: ^], [3], [9]. The
console will display "SET DEFAULTS ." Press [ENTER]. Then console will
rest itself and then display "DONE."
Quick Scan Programming
You can quickly access any of the custom menus by pressing [LEVEL: ^],
[3], [ENTER]. The console will then display "CUSTOMIZE." Scroll through the
following options:
[SELECT] " MAX TIME "
[SELECT] "CHANGE UNITS"
[SELECT] "HR INPUTS"
[SELECT] "LANGUAGE"
[SELECT] "CONTRAST ADJ"
Page 28
0
1
2
4
5