Table of Contents
Advertisement
Gas Conversion and Specifications
Gas Regulator
NOTE: Gas
regulator
convertible between Natural Gas
and LP Gas, but it's outlet
pressure is fixed ex-factory and
is NOT to be adjusted.
Gas Type Labels
On completion of gas conversion, replace gas type labels located at:-
- Rear of unit, above gas connection.
- Beside rating plate.
Commissioning
Before leaving installation;
1.
Check all gas connections for leakage using soapy water or other gas detecting equipment.
2.
Carry out a 'Commissioning' check of appliance as shown in Installation Section of this manual.
3.
Ensure any adjustments done to components that have adjustments / settings paint sealed are to be
re-sealed.
NOTE: If for some reason it is not possible to get the appliance to operate correctly, shut off the
gas supply and contact the supplier of this appliance.
supplied
is
Warning
D
O NOT USE A NAKED FLAME TO CHECK FOR GAS LEAKAGES
24
NOTE, Pin rotated
for Natural Gas
NOTE, Pin rotated
for LPG
.
Advertisement
Table of Contents
