Reboot The V2 Speaker - CyberData 11098 Operation Manual

2.3.12.2 Reboot the V2 Speaker

To reboot a V2 Speaker, log in to the web page as instructed in
Configuration Home
1. Click Update Firmware to open the Upgrade Firmware page
2. Click Reboot. A normal restart will occur and you will see the following Reboot page.
Operations Guide
Page".
Figure 2-28. Reboot System Section
Reboot
Figure 2-29. Reboot Page
930274F
Installing the VoIP V2 Speaker
Configure the Speaker Parameters
Section 2.3.2, "Log in to the
(Figure 2-28).
CyberData Corporation
62