CyberData 11098 Operation Manual page 4

• Corrects incorrect usage of "it's" in
• Adds the following text to
• Adds the following text to
• Adds the following text to
• Adds
• Adds the following text to
• Adds the following text to
• Updates the following with redlines from UL (4-30-2010):
• Adds "Nightringer" and
Operations Guide
• "You must not use the V2 Speaker in combination with both a Clock Kit and an auxiliary
speaker. The V2 Speaker may only be used separately with an auxiliary speaker or used
separately with a Clock Kit. See Figure 2-7, "Clock Kit with Extra Speaker Connection is
NOT ALLOWED."
• "Stored Network Settings"
• "Shows the settings stored in non-volatile
• "Buffer SIP Calls"
• "When this is enabled, SIP calls to the speaker will be stored in memory and will play when
either the call is terminated or the buffer is full. The receive buffer is 2MB in size and this is
equal to about four minutes of ulaw encoded
• "Buffered"
• "When buffering is enabled for a multicast stream, it will store any audio received on this
socket to memory and play it back when the stream is stopped or the buffer is
Section 2.3.7.1, "Assigning
• Adds Ringtones and Nightringtones
• Adds Lengthy Pages
• Adds Buffered Audio
• "Night Ring Tone"
• "Specifies the ringtone for nightring. By default this parameter uses the same audio file that
is selected for the Ring Tone
• "Enable Night Ring Events"
• "When selected, there is a notification when the speaker receives a night
• Table 1-1, "Product Specifications"
• Adds Figure 1-3, "Optional Connections (J9 and
• Figure 2-3, "Running the V2 Speaker with Auxiliary Power"
• Adds the following operational note:
V2 Speaker is connected to a PoE power source through J1. Improper operation or
equipment damage may
• Adds Figure 2-4, "V2 Speaker with Auxiliary Remote Call
• Section 2.2.2.1, "V2 Speaker with an External Device"
• Figure 2-5, "V2 Speaker with Alert Strobe"
• Section 2.2.2.2, "V2 Speaker with Auxiliary Speaker Connection"
• Figure 2-6, "V2 Speaker with Auxiliary Speaker Connection"
• Figure 2-8, "V2 Speaker with Line Out"
Section 2.3.11.1,
Table 2-7, "Network Configuration
memory."
Table 2-8, "SIP Configuration
Table 2-11, "Multicast Configuration
Priority".
section.
section.
section.
Table 2-12, "Audio Configuration
parameter."
Table 2-18, "Event Configuration":
"Do not connect an auxiliary power supply when the
occur."
"Buffered page" to Section 1.3, "Product
930274F
"Autoprovisioning".
Parameters":
Parameters":
audio."
Parameters":
Parameters":
J10)".
Button".
Features".
CyberData Corporation
full."
ring."