CyberData 11098 Operation Manual page 3

Revision Information
Revision 930274F was updated on 6-24-2010 and has the following changes:
• Updates
Revision 930274E was updated on 5-28-2010 and has the following changes:
• Updates
• Adds
• Rewords the following note for
• Changes Heading Level and Updates
• Corrects the incorrect usage of the word "it's" in
• Updates
• Updates
• Updates
• Adds
• Updates the following text in
•
• Updates
• Updates
• Updates
• Updates
• Updates
• Adds
• Updates
• Updates
• Updates
• Updates
• Adds
• Updates
• Updates
• Adds the following Operational Notes to
Operations Guide
Figure 2-6, "V2 Speaker with Auxiliary Speaker Connection"
numbers for the auxiliary speaker.
Power Input (J1)
1.6, "Product Specifications".
Section 2.3.1, "V2 Speaker Web Page Navigation"
information from all web page tables.
"The Clock Configuration page is always visible. If a clock is not installed, the Clock Status will
indicate NOT INSTALLED. Otherwise it shows
Parameters"
Table 2-8, "SIP Configuration Parameters"
Table 2-15, "Time Zone String Parts"
Table 2-16, "Time Zone String Examples"
Table 2-19, "Autoprovisioning Configuration Parameters"
Unregister on Reboot*:"When selected, on boot, the speaker will first register with a SIP server
with a expiration delay of 0 seconds. This has the effect of unregistering any current devices on
this extension."
Figure 2-13, "Home Page"
Figure 2-14, "Device Configuration Page"
Figure 2-15, "Network Configuration Page"
Figure 2-16, "SIP Configuration Page"
Figure 2-17, "SIP Configuration Page Set to Point-to-Point Mode"
5.1.0.
Figure 2-18, "Nightringer Configuration Setup"
Figure 2-19, "Multicast Configuration Setup"
Figure 2-20, "Audio Configuration Page"
Figure 2-24, "NTP Server and Clock Configuration Page"
Figure 2-25, "Event Configuration Page"
Figure 2-26, "Autoprovisioning Configuration Page"
Figure 2-27, "Firmware Upgrade Page"
Section 2.3.11.1,
Connection":
• "Because of the limitations of PoE power, when running the V2 Speaker with a second
auxiliary speaker, the analog or digital volume level setting must not exceed a setting of
and adds or Auxiliary Power Input (Terminal Block J10)
Section 2.3.9, "Configure the NTP Server and Clock
INSTALLED."
Section 2.3.11, "Configure the Autoprovisioning
Section 2.3.11.1,
Table 2-8, "SIP Configuration
per firmware version 5.1.0.
per firmware version 5.1.0.
per firmware version 5.1.0.
"Autoprovisioning". per firmware version 5.1.0.
Section 2.2.2.2, "V2 Speaker with Auxiliary Speaker
930274F
with new 01 part
and removes web page navigation
"Autoprovisioning".
Parameters":
per firmware version 5.1.0.
per firmware version 5.1.0.
per firmware version
per firmware version 5.1.0.
per firmware version 5.1.0.
per firmware version 5.1.0.
per firmware version 5.1.0.
per firmware version 5.1.0.
per firmware version 5.1.0.
CyberData Corporation
in Section
Parameters":
6."