Defining Static Routes; Getting Started; Management - D-Link DES-3326 User Manual

24-port NWay Ethernet Switch User's Guide
regards a VLAN with an IP network address and corresponding
subnet mask assigned as an IP interface in IP Routing mode.
Defining Default Routes
Routes between the IP interfaces and a default gateway or other
router with a WAN connection should be determined beforehand
and entered into the static/default routing table on the DES-3326.

Getting Started

The first step in getting started in using web-based management
for your Switch is to secure a browser. A Web browser is a
program which allows a person to read hypertext, for example,
Netscape Navigator or Microsoft Internet Explorer. Follow the
installation instructions for the browser.
The second and last step is to configure the IP interface of the
Switch. This can be done manually through a console (see the
Configure IP Address section in "Using The Console Interface"
chapter 6).

Management

To begin managing your Switch simply run the browser you have
installed on your computer and point it to the IP address you
have defined for the device. The URL in the address bar should
read something like: http://123.123.123.123, where the numbers
123 represent the IP address of the switch.
254 Web-Based Network Management