24-port NWay Ethernet Switch User's Guide
Configure Ports
Highlight Configure Ports from the main menu and press
enter:
Figure 6-17. Configure Ports Screen
Toggle the View Ports:<1 to 12 > field, using the space bar, to
view the configuration of either ports 1 through 12 or ports 13
through 24. To configure an specific port, toggle the Configure
Port:[ ] field until the appropriate port number appears.
Toggle the State:<
> field to either Enable or Disable a
given port.
Toggle the Speed/Duplex:<
> field to either select the speed
and duplex/half-duplex state of the port. Auto – auto-negotiation
between 10 and 100 Mbps devices, full- or half-duplex. The Auto
setting allows the port to automatically determine the fastest
settings the device the port is connected to can handle, and then
to use those settings.
The other options are 100M/Full,
150
Configuring the Switch Using the Console Interface