Port Mirroring - D-Link DES-3326 User Manual

24-port NWay Ethernet Switch User's Guide
Note: A router port will be dynamically configured when
IGMP query packets, RIPv2 multicast, DVMRP multicast,
PIM-DM multicast packets are detected flowing into a
port.
The Action:<
Delete using the space bar. To add a port to the static router
port table, select Add/Modify and enter the VID of the VLAN
the router port will belong to.
Highlight the first field of Router Port (M/-):[
Each port can be set individually as a router port by highlighting
the port' s entry using the arrow keys, and then toggling between
M and – using the space bar.
Highlight APPLY and press enter to make the changes current.
Use Save Changes from the Main Menu to enter the changes
into NV-RAM.
To delete an entry, select Delete and enter the VID of the VLAN
for which the router port table entry is to be deleted. Highlight
APPLY and press enter.
deleted. Use Save Changes from the Main Menu to enter the
changes into NV-RAM.

Port Mirroring

To configure a port for port mirroring:
Highlight Mirroring from the Main Menu and press enter.
200
> field can be toggled between Add/Modify and
The entry for the VLAN will be
Configuring the Switch Using the Console Interface
][ ][ ].