D-Link DES-3326 User Manual page 241

Enter the IP address of the TFTP server in the Server IP
Address:[
Note: The TFTP server must be on the same IP subnet as
the switch.
Enter the path and the filename to the firmware file on the TFTP
server. Note that in the above example, the firmware file is in
the root directory of the C drive of the TFTP server.
Note:
The TFTP server must be running TFTP server
software to perform the file transfer.
software is a part of many network management software
packages,, or can be obtained as a separate program.
Highlight APPLY and press enter record the IP address of the
TFTP server.
enter the address into NV-RAM
Highlight START and press enter to initiate the file transfer.
Configuring the Switch Using the Console Interface
24-port NWay Ethernet Switch User's Guide
Figure 6-70. Upgrade Firmare
] field.
Use Save Changes from the Main Menu to
TFTP server
225