24-port NWay Ethernet Switch User's Guide
The DVMRP and PIM-DM are set using the IP Multicasting
Settings – from the Main Menu under Multicasting.
Highlight APPLY and press enter to make the changes current.
Layer 3 Switch Mode - Setup RIP
The Routing Information Protocol (RIP) is a distance-vector
protocol that uses the hop count as its criteria for making
routing decisions. RIP is an Interior Gateway Protocol (IGP),
which means that it performs routing within a single autonomous
system.
Highlight Setup RIP Configuration from the Layer 3 IP
Networking menu and press enter.
Figure 6-26. RIP Configuration Menu
RIP Status:<Disabled> can be toggled between Enabled and
Disabled using the space bar.
This function allows the RIP
Configuring the Switch Using the Console Interface
161