D-Link DES-3326 User Manual page 309

24-port NWay Ethernet Switch User's Guide
Auth.
More
Edit RIP Setup
The following menu is used to edit the switch' s RIP setup.
Parameter
Subnet Name
IP Address
Tx Mode
Web-Based Network Management
V2 Only, V1 and V2, or Disabled. This
entry specifies which version of the RIP
protocol will be used to receive RIP
packets. The Disabled entry prevents the
reception of RIP packets.
Displays whether RIP is configured to use
an authorization string.
A link to the Setup RIP - Edit
Figure 7-22. Setup RIP – Edit Screen
Description
Displays the name of the subnet on which
RIP is to be edited. This subnet must be
previously configured on the switch.
Displays the IP address corresponding to
the subnet name above.
Allows transmitted RIP packets to be
structured as V1 only, V1 Compatible,
293