Upper Threshold for Module Ports: [128]Kpps This
is the number of thousands Broadcast/Multicast packets
per second received by the switch – on one of the module
ports – that will trigger the switch' s reaction to a
Broadcast/Multicast storm.
Broadcast Storm Mode:<Disabled> This field can be
toggled between Enabled and Disabled using the space
bar. This enables or disables, globally, the switch' s
reaction to Broadcast storms, triggered at the threshold
set above.
Multicast Storm Mode:<Disabled> This field can be
toggled between Enabled and Disabled using the space
bar. This enables or disables, globally, the switch' s
reaction to Multicast storms, triggered at the threshold
set above.
Layer 3 IP Routing Protocol Settings
Note: These IP Routing Protocol Settings are only for
enabling
available on the switch.
Protocol (RIP) is setup under IP Networking from the
Main Menu.
To access the Layer 3 Switch Settings menu, highlight Layer 3
IP Routing Protocol Settings on the Switch Settings menu
and press enter.
Configuring the Switch Using the Console Interface
24-port NWay Ethernet Switch User's Guide
or
disabling,
globally,
routing
The Routing Information
protocols
159