Framing And Clearances A. Selecting Appliance Location - Heat & Glo Crescent II Owner's Manual

3
Framing and Clearances
NOTE:
• Illustrations reflect typical installations and are FOR
DESIGN PURPOSES ONLY.
• Illustrations/diagrams are not drawn to scale.
• Actual installation may vary due to individual design
preference.
A. Selecting Appliance Location
When selecting a location for your appliance it is important
to consider the required clearances to walls (see Figure 3.1).
D
Figure 3.1 Framing Dimensions
6
In addition to these framing dimensions, also reference the
following sections:
• Clearances and Mantel Projections (Section 3.C and 3.D)
• Vent Clearances and Framing (Section 6)
A
24-5/8
Inches
625
Millimeters
Heat & Glo • Crescent II • 2083-902 Rev. G • 9/05
Fire Risk
Provide adequate clearance:
• Around air openings
• To combustibles
• For service access
Locate appliance away from traffic areas.
NOTE: For actual appliance dimensions refer to Sec-
tion 16.
B
B C D
23-1/2 34-7/8 15-1/8
597 886 384
WARNING
C
A