Positioning The Logs; Log Placement Instructions - Heat & Glo SL-350TRS-CE-D Installer's Manual

Log Set Assembly: LOGS-350CE-D
2
3
Carefully remove the logs from the packaging. CAUTION: Logs are fragile!
LOG #1 (SRV327-701):
bracket. The right side sits behind the tab on the support bracket.
2
LOG #2 (SRV2033-701):
the burner by placing the log slot over the burner tab as shown.
36
1
4
5
6
1
Place log #1 at the rear of the unit, with the left edge behind the tab on the pilot
Locate the bottom groove of log #2 over the left most grate bar and align over
Heat & Glo • SL-350TRS-CE-D • 2033-900 Rev. N • 10/07
LOG PLACEMENT
INSTRUCTIONS
PILOT
BRACKET TAB
BURNER TABS
1
2
SUPPORT
BRACKET