Power Button - Dish Network Satellite Receiver User Manual

Chapter 3
Using the System
Page 82
Control a DVD (or a VCR or a Second DVD or a VCR Player)
Only the buttons described here control a DVD or VCR player. Some of the
buttons described here may not control your DVD or VCR player. See the
user's manual that came with your DVD or VCR player for information
about the features.
DVD Mode Button
You must first set up the remote to control the DVD or VCR player. See Set
Up the Remote to Control Devices, beginning on page 77. Then, you must
press the DVD mode button to set the remote to DVD mode. The DVD mode
button lights for two seconds to show you've set the remote to DVD mode.
Make sure you keep the remote in DVD mode to use the buttons described
here.
: You can set up the remote to control a second DVD or VCR player in
Note
AUX mode the same way it controls the first DVD or VCR player in DVD
mode. See Set Up the Remotes to Control Other Devices beginning on page
77.
: You must set the remote to DVD mode to set it up to control a VCR
Note
player.
TV/Video Button
Use the TV/VIDEO button to switch the DVD between its TV mode and its
DVD mode (see your DVD user's manual for information).

Power Button

Press the blank POWER button to turn the DVD on or off.
DVD/VCR Buttons
• Press the LEFT ARROW button to rewind a videotape
or move backward in a DVD.
Press the DOWN ARROW button to pause a
•
videotape or DVD. Press this button or the PLAY
button to go back to playing the tape or DVD.
• Press the RIGHT ARROW button to fast forward a
videotape or DVD.
• Press the STOP button to stop playing or recording on
a videotape or DVD.