Remote Control Buttons - Dish Network Satellite Receiver User Manual

Chapter 3
Using the System

Remote Control Buttons

Page 80
3. For AUX mode only. The first
group of flashes tells you what
the AUX mode controls. A
quick flash (zero) before the
three-digit code is for a TV;
one regular flash is for a VCR
or DVD player; and two
flashes is for a tuner or
amplifier.
Control the Receiver
When you get the remote it's already set up to control the receiver. However,
you must set up the remote to control the TV before you can use the MUTE
and VOLUME buttons.
For information on the remote buttons that control the receiver, see Using
the Remote Controls on page 37.
Control a TV (or a Second TV)
Only the buttons described here control a TV. Some of the buttons described
here may not control your TV. Please see your TV user's manual for
information about the TV's features.
TV Mode Button
You must first set up the remote to control the TV. See Set Up the Remote to
Control Other Devices, beginning on page 77. Then, you must press the TV
mode button to set the remote to TV mode. The TV mode button lights for
two seconds to show you've set the remote to TV mode. Make sure you keep
the remote in TV mode to use the buttons described here.
: You can set up the remote to control a second TV in AUX mode, the
Note
same way it controls the first TV in TV mode. See Set Up the Remotes to
Control Other Devices beginning on page 77.
TV/Video Button
If the TV has video input options, use this button to switch the TV video
input.
Power Button
Press the TV POWER button to turn the TV on or off.
For example, if the TV code is 570,
the AUX mode button flashes once
quickly (indicating 0 for TV),
pauses, flashes five times, pauses,
flashes seven times, pauses, and
flashes once quickly.