Configuration (Standalone); Automatic Act Mode - Chauvet Freedom Par RGBA User Manual

Configuration
(Standalone)
Automatic ACt
Mode
Page 20 of 88
Set the product in one of the standalone modes to control without a DMX controller.
1. Connect the product to a suitable power outlet.
2. Turn the product on.
Never connect a product that is operating in any standalone mode
(Static, Automatic, or Sound) to a DMX string connected to a DMX controller.
Products in standalone mode may transmit DMX signals that could interfere with
the DMX signals from the controller.
To enable the Automatic ACt mode, do the following:
1. Press <MODE> repeatedly until SYS, ACt, ACtC, SLAv, or S-Ir shows on the
display.
2. Use <UP> or <DOWN> to select ACt.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to choose your desired program (A001–A026).
5. Press <ENTER>.
Certain programs will have additional functionality. To find these options, press
<ENTER> after selecting an auto program. Then press <UP> or <DOWN> to choose the
desired setting. Not every program will feature additional functions.
Function
F.000–F.100
SL.00–SL.32
P.000–P.100
C.000–C.100
Y.000–Y.100
Description
Flash speed (slow to fast)
Sound sensitivity (Automatic mode)
Run speed (slow to fast)
Blue
Amber
Freedom™ Par RGBA and Strip Mini RGBA User Manual Rev. 4