Mounting; Orientation; Rigging - Chauvet Freedom Par RGBA User Manual

Mounting

Orientation

Rigging

Mounting Diagram
Page 16 of 88
Before mounting the product, read and follow the safety recommendations of the Safety
Notes.
The Freedom™ RGBA series products may be mounted in any position; however, make
sure adequate ventilation is provided.
·
Before deciding on a location, always make sure there is easy access to the product
for maintenance and programming.
·
Make sure that the structure or surface onto which you are mounting the product
can support the product's weight (see the
·
When mounting the product overhead, always use a safety cable. Mount the
product securely to a rigging point, such as an elevated platform or a truss.
·
When rigging the product onto a truss, you should use a mounting clamp of
appropriate weight capacity.
·
When power linking multiple products, you must always consider the length of the
power linking cable and mount the products close enough for the cable to reach.
·
The bracket adjustment knobs allow for directional adjustment when aiming the
product to the desired angle. Only loosen or tighten the bracket knobs manually.
Using tools could damage the knobs.
·
The mounting brackets on the Freedom™ Strip Mini RGBA also serve as floor
supports/allow for surface mounting. When mounting the product on the floor, make
sure that the product and cables are away from people and vehicles.
Bracket Adjustment Knob
Technical Specifications).
Mounting Bracket
Tilt Angle
Adjustment Knob
Bracket Adjustment Knob
Freedom™ Par RGBA and Strip Mini RGBA User Manual Rev. 4
Mounting Brackets