Assembly - Healthrider HREL50020 User Manual

ASSEMBLY

Assembly requires two people. Place all parts of the elliptical crosstrainer in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the
included allen wrenches, assembly requires a phillips screwdriver , an adjustable
wrench , and a rubber mallet .
As you assemble the elliptical crosstrainer, use the drawings below to identify the small parts used in assembly.
The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on
page 22. The second number refers to the quantity used in assembly. Note: Some small parts may have been
pre-assembled for shipping. If a part is not in the parts bag, check to see if it has been pre-assembled.
M8 Split M10 Split M8 Washer
M10 Washer
Washer (58)–4 Washer (13)–3 (33)–6
Plastic Pedal
(94)–2
Spacer (11)–2
Console M10 x 25mm M8 x 40mm Button M8 x 19mm M4 x 16mm
Screw (35)–4 Screw (100)–3 Bolt (101)–6 Screw (30)–4 Screw (72)–1
M10 x 105mm Carriage Bolt (60)–2
M10 x 92mm Carriage Bolt (86)–2
M10 x 65mm Carriage Bolt (43)–2
3/4" Axle Cap (61)–2
M8 Nylon M10 Nylon
57mm Spacer (22)–2 Locknut (80)–8 Locknut (26)–4
5