Assembly - Healthrider H 92E User Manual

ASSEMBLY

Assembly requires two persons. Place all parts of the elliptical in a cleared area and remove the packing mate-
rials. Do not dispose of the packing materials until assembly is completed.
In addition to the included tool(s), assembly requires a Phillips screwdriver , an adjustable
wrench , and a rubber mallet .
Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the
key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it
has been preassembled. To avoid damaging parts, do not use power tools for assembly.
M6 Washer M8 Split
(112)–8
Washer (103)–4 M8 Washer Wave Washer
(118)–2
(95)–8
M4 x 16mm M6 x 12mm M6 x 50mm M8 x 16mm
Screw (106)–8 Screw (111)–4 Screw (62)–4 Screw (102)–16
M8 x 25mm M10 x 95mm Screw (100)–4
Screw (121)–2
5