Table of Contents
Advertisement
ASSEMBLY
Assembly requires two people. Place all parts of the elliptical crosstrainer in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed.
The following tools are required for assembly: the included allen wrenches
phillips screwdriver
As you assemble the elliptical crosstrainer, use the drawings below to identify the small parts used in assembly.
The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on
page 18. The second number refers to the quantity used in assembly. Note: Some small parts may have been
pre-assembled for shipping. If a part is not in the parts bag, check to see if it has been pre-assembled.
M8 Split
Washer (85)–4
M4 x 16mm
Screw (60)–5
Patch Bolt (90)–1
All manuals and user guides at all-guides.com
adjustable wrench
M10 Split
M8 Washer
Washer (73)–4
M4 x 16mm
M8 x 19mm Button
Flange Screw
Screw (76)–4
(88)—6
and rubber mallet
Curved
Washer (74)–4
(89)–4
Console Plate
Screw (39)–4
Handlebar Bolt (92)–4
Carriage Bolt (2)–2
4
and your own
.
M10 Flat
Washer (94)–5
M10 Nylon
Locknut (55)–6
Advertisement
Table of Contents
