Mpx200 Iscsi/Fcip Configurations - HP MPX200 User Manual

MPX200 iSCSI/FCIP configurations

The MPX200 router supports the following configurations:
Figure 93 (page 111)
Figure 94 (page 112)
Figure 95 (page 112)
Figure 96 (page 112)
links
Figure 97 (page 113)
links
Figure 98 (page 113)
Figure 99 (page 113)
links
Figure 100 (page 114)
long-distance links
Figure 101 (page 114)
blade
Figure 102 (page 115)
Figure 103 (page 115)
Figure 104 (page 116)
Figure 105 (page 117)
Figure 106 (page 118)
Figure 107 (page 119)
peer-to-peer connectivity
Figure 93 MPX200 basic FCIP configuration with one or two long-distance links
Figure 94 (page 112)
Integrated Routing. This provides fabric isolation between the local and remote fabrics, allowing
device access without merging the fabrics. This can be implemented in all supported MPX200 FCIP
configurations using B-series Fibre Channel switches with Integrated Routing or B-series routers
configured for Fibre Channel routing.
MPX200 basic FCIP configuration with one or two long-distance links
MPX200 FCIP with B-series Integrated Routing
MPX200 FCIP with C-series IVR
MPX200 high-availability configuration with one or two long-distance
MPX200 high-availability configuration with fully-redundant long-distance
MPX200 configuration with remote IP distance gateway (mpx1 10)
MPX200 highly-redundant configuration with one or two long-distance
MPX200 highly redundant pairs of gateways with fully-redundant
MPX200 simultaneous iSCSI and FCIP with remote dedicated FCIP
MPX200 simultaneous iSCSI and FCIP, both local and remote
MPX200 iSCSI and FCIP dedicated blades, both local and remote
HP Continuous Access 3-site configuration with four MPX200 routers
HP Continuous Access 3-site configuration with six MPX200 routers
HP Continuous Access 3-site configuration with eight MPX200 routers
HP Continuous Access 3-site configuration with six MPX200 router full
shows a configuration using MPX200 with FCIP and B-series switches with
MPX200 iSCSI/FCIP configurations 1 1 1