Installing The Mpio Feature For Windows Server 2003 - HP MPX200 User Manual

Figure 61 MPIO Properties page after reboot
4. Reboot the system to MPIO the devices.

Installing the MPIO feature for Windows Server 2003

For Windows Server 2003, if you are installing the initiator for the first time, select all of the
installation option check boxes, and then click Next
Figure 62 Software update installation wizard
To add or remove Microsoft iSCSI initiator components after the initial installation, run the setup
package executable and select the Microsoft MPIO Multipathing Support for iSCSI check box. The
application automatically selects the check boxes for components that are already installed. For
example, if you want to add the Microsoft MPIO component, leave the other check boxes blank;
select only the Microsoft MPIO check box.
NOTE: After the installation is complete, you must reboot the system.
68 MPX200 iSCSI configuration rules and guidelines
(Figure 62 (page 68)).