HP MPX200 User Manual page 226

Table 34 MPX200 log messages (continued)
108032
#%d: QLGetVpDatabase:
MBOX_CMD_GET_VP_DATABASE for VP
%d fatal error
108033
#%d: QLGetVpDatabase:
MBOX_CMD_GET_VP_DATABASE for VP
%d failed %x
108049
#%d: QLVerifyMenloFw:
EXECUTE_COMMAND_IOCB failed MB0
%x MB1 %x
108050
#%d: QLVerifyMenloFw:
EXECUTE_COMMAND_IOCB fatal
error
108064
#%d: QLGetFwState: Get Firmware
State failed 0-3 %x %x %x %x
1 18882
#%d: QLIoctlDisable: Reset
adapter
1 19088
#%d: QLIsrEventHandler: LIP
occurred (%x): mailbox1 = %x
1 19089
#%d: QLIsrEventHandler: LIP
reset occurred (%x): mailbox1
= %x
1 19090
#%d: QLIsrEventHandler: Link up
(%x) mailbox1 = %x
1 19092
#%d: QLIsrEventHandler: Link
mode up (%x): RunTimeMode=%x
1 19093
#%d: QLIsrEventHandler: RSCN
update (%x) rscnInfo: %x
1 19097
#%d: QLIsrEventHandler: Port
update (%x) mb1-3 %x %x %x
1 19144
#%d: QLTimer: VP %d discover a
reject device PID %02x%02x%02x
120278
#%d: QLFlashGetNvram: Invalid
Serial Link Control 0x%x for
port %d
120373
#%d: QLIsrEventHandler: DCBX
Completed (%x)
120374
#%d: QLIsrEventHandler: IDC
Completion (%x) %x, %x, %x, %x,
%x, %x, %x
120375
#%d: QLIsrEventHandler: IDC
Notification (%x), %x, %x, %x,
%x, %x, %x, %x
226 Log messages
FC Error FC controller failed the Get VP
Database command (for virtual port
%d).
FC Error FC controller failed the Get VP
Database command (for virtual port
%d) with status x.
FC Error FC controller reported failure status for
an Execute IOCB (input/output control
block) command.
FC Error FC controller reported a fatal error
while processing an Execute IOCB
command.
FC Error FC controller reported failure status for
a Get Firmware State command.
FC Info Request to reset the FC processor
(adapter) received from IOCTL
interface.
FC Info FC loop initialization process (LIP)
occurred. The LIP type is reported, as
is the contents of the FC processor's
mailbox 1 register.
FC Info FC LIP reset occurred. The LIP reset
type is reported, as is the contents of
the FC processor's mailbox 1 register.
FC Info FC link up occurred. Event status is
reported, as is the contents of the FC
processor's mailbox 1 register.
FC Info FC link up occurred. Event status is
reported, as is the RunTimeMode (0 =
loop, 1 = point-to-point).
FC Info An RSCN was received. Event status
is reported, as is the RSCN
information.
FC Info FC port update. Event status is
reported, as is the contents of the FC
processor's mailbox 1, 2, and 3
registers.
FC Info A virtual port logged into a device,
but the device rejected the login.
FC Info Update NVRAM for the invalid serial
link control for the mezzanine
platform.
FC Info For FCoE protocol, the data center
bridging exchange protocol (DCBX)
is complete.
FC Info For FCoE protocol, the inter-driver
communication (IDC) is complete.
FC Info For FCoE protocol, the IDC notification
came from another driver.