HP MPX200 User Manual page 224

Table 34 MPX200 log messages (continued)
87348
#%d: QLGetFwStateCallback: link
1000Mb FDX
87350
#%d: QLGetFwStateCallback:
Invalid link speed 0x%x
102419
#%d: qlutm_init: Diagnostic
failed, port 1 invalid SRAM
102420
#%d: qlutm_init: Diagnostic
failed, port 1 POST failed
102421
#%d: qlutm_init: Diagnostic
failed, port 2 invalid SRAM
102422
#%d: qlutm_init: Diagnostic
failed, port 2 POST failed
102423
#%d: qlutm_init: Failed to
return diagnostic result to
Bridge
102656
#%d: QLInitializeAdapter: Reset
ISP failed
102657
#%d: QLInitializeAdapter: Load
RISC code failed
102658
#%d: QLInitializeAdapter: Load
ISP2322 receive sequencer code
failed
102659
#%d: QLInitializeAdapter: Load
ISP2322 transmit sequencer code
failed
102662
#%d: QLInitializeAdapter:
Verify Checksum command failed
(%x)
102680
#%d: QLInitializeFW: FAILED
102688
#%d: QLInterruptServiceRoutine:
Risc pause %x with parity error
hccr %x, Disable adapter
102689
#%d: QLInterruptServiceRoutine:
Invalid interrupt status: %x
102716
#%d: QLIsrEventHandler: System
error event (%x), MB1=%x,
MB2=%x, MB3=%x, MB4=%x, MB5=%x,
MB6=%x, MB7=%x
102746
#%d: QLProcessResponseQueue:
Invalid handle %x, type %x
102752
#%d: QLTimer: Ext Ram parity
error exceed limit cnt 0x%x,
limit 0x%x, Disabled adapter
102755
#%d: QLTimer: Heartbeat failed
102800
#%d: QLRestartRisc: restart
RISC
106583
#%d: QLUtmReceiveIo: Path
invalid/FW No resource count %x
224 Log messages
iSCSI Info iSCSI controller reported a link
speed/configuration of 1000 Mb FDX.
iSCSI Info iSCSI controller reported an invalid
link speed.
FC Fatal FC1 processor SRAM test failed.
FC Fatal FC1 processor POST failed.
FC Fatal FC2 processor SRAM test failed.
FC Fatal FC2 processor POST failed.
FC Fatal FC processor failed to return
diagnostic results.
FC Fatal FC processor failed reset.
FC Fatal FC processor firmware load failed.
FC Fatal FC processor receive sequencer code
load failed.
FC Fatal FC processor transmit sequencer code
load failed.
FC Fatal FC processor firmware checksum
failed.
FC Fatal FC processor firmware initialization
failed.
FC Fatal FC processor paused due to internal
parity error.
FC Fatal FC processor returned an invalid
interrupt status.
FC Fatal FC processor system error.
FC Fatal Response queue entry contains an
invalid handle.
FC Fatal FC processor external SRAM parity
error count exceeded limit; FC port
disabled.
FC Fatal FC processor heartbeat failed.
FC Fatal FC processor being restarted.`
FC Error FC processor received a SCSI
command for an unknown target path