HP MPX200 User Manual page 228

Table 34 MPX200 log messages (continued)
139296
QBRPC_Initialize:FcTgt Mem
Allocation error
139297
QBRPC_Initialize:BridgeStatus
Mem Allocation error
139298
QBRPC_Initialize:Diag Mem
Allocation error
139299
QBRPC_Initialize:DiagLog Mem
Allocation error
139300
QBRPC_Initialize:FruImage Mem
Allocation error
139301
QBRPC_Initialize:OemMfg Mem
Allocation error
139302
QBRPC_Initialize:Status Mem
Allocation error
139303
QBRPC_Initialize:TcpIpStats Mem
Allocation error
139304
QBRPC_Initialize:NtpStats Mem
Allocation error
139305
QBRPC_Initialize:LunList
MemAlloc error
139315
QBRPC_FreeResources:Entered
139553
checkDuplicateIp: Detected
Error %08x %08x%04x
139930
FcipRoute#%d Failed with Memory
Allocation Error
139931
FcipRoute#%d Failed with
Invalid Arg Error
139932
FcipRoute#%d Failed with
Unknown Device Error
139933
FcipRoute#%d Failed with Kernel
Error
139934
FcipRoute#%d Failed with
Network Configuration Error
139935
FcipRoute#%d Failed with
Persistence Read Failure
139936
FcipRoute#%d Failed with
Persistence Write Failure
139937
FcipRoute#%d Failed with IP
Address Reuse Error
139938
FcipRoute#%d Add Failed because
relevant FCIP Licence not
available
151842
FW Upgrade performed: new
version is: %d.%d.%d.%d
228 Log messages
User Error Failed memory allocation for FC
Target API.
User Error Failed memory allocation for System
Status API.
User Error Failed memory allocation for
Diagnostic API.
User Error Failed memory allocation for
Diagnostic Log API.
User Error Failed memory allocation for FRU
Image API.
User Error Failed memory allocation for OEM
Manufacturing API.
User Error Failed memory allocation for Status
API.
User Error Failed memory allocation for TCP/IP
Statistics API.
User Error Failed memory allocation for NTP
Status API.
User Error Failed memory allocation for LUN List
API.
User Error RPC free resources entry point.
User Error Detected duplicate IP address for
management port.
App Error FCIP route add/mod failed because
of lack of memory.
App Error FCIP route add/mod failed because
the arguments supplied were incorrect.
App Error FCIP route add/mod failed because
of incorrect configuration.
App Error FCIP route add/mod failed because
of configuration error.
App Error FCIP route add/mod failed because
of the Ethernet network configuration.
App Error FCIP route add/mod failed because
of an error in reading the saved
configuration from persistence.
App Error FCIP route add/mod failed because
of an error in writing the route
configuration to persistence.
App Error FCIP route add/mod failed because
an IP address supplied is already
under use.
App Error FCIP route add/mod failed because
FCIP license is not present.
User Info A firmware upgrade was performed,
the new version is: d.d.d.d.