Call Transfer; Conference Calls - Toshiba IP5000 Quick Reference Manual

Call Transfer

Simple Transfer
1. While on a call, press TRNS soft key.
2. Dial the extension number and the call is transferred.
If your telephone doesn't have a display, or if you would like
to announce the call
1. While on a call, press
2. Dial the extension number. (Optional: Stay on the line to
announce the call).
3. Hang Up.
Note
caller by pressing your flashing extension button.

Conference Calls

1. While on a call, press
2. Call another station or outside line.
3. When the called party answers, press
conferenced.
Note
answer, press the flashing line button to return to the original call.
4. Repeat Steps 1~3 to add more lines. You can conference up to
eight parties.
To transfer conference control
Note
hangs up, control transfers to the first internal station added to the
conference. If no internal stations are in the conference, the call
disconnects.
1. Perform Steps 1 and 2 above to add the line to which you wish
to transfer conference control.
2. Announce the call and hang up to transfer the call. This station
is now the conference "master" with the ability to add or delete
parties.
To hold a conference call
If you are the "master" conference controller, press
(or twice for Executive Hold) to place the conference call on
hold.
The conference continues and you can join at any time
without giving up "master" abilities. Music-on-hold is
suppressed in this mode.
To conference two outside Lines
1. While talking on an outside call, press
2. Access an outside line.
3. After the party answers, press
Note
answer, press the flashing line button to return to the original call.
8
Strata CIX IP5000-series Telephone Quick Reference Guide 10/08
During call transfer you can reconnect to the original
If you receive a busy tone or if the station does not
When the person who initiates the conference (master)
If you receive a busy tone or if the station does not
.
.
twice and hang up.
. All parties are
.
once