Screen Adjustment And Setting; Day Screen And Night Screen; Screen Color In Tunnels; Volume Settings - Eclipse AVN726EA Owner's Manual

ATTENTION
If the vehicle's battery is disconnected (for repairs to the vehicle or for removing this unit), all the
Trip Computer history (Average Speed, Total time, etc) in the memory will be lost.

Screen Adjustment and Setting

■ Day screen and night screen

This unit uses different color profiles during the day and during the night.
● Daytime colors are similar to those of paper road maps.
● The night color profiles use dark colors for large objects to keep the average brightness of
the screen low.
This unit offers different daytime and night color profiles. You can switch the daytime and night
color profiles based on lighting and lighting out of vehicle.

■ Screen color in tunnels

When entering a tunnel, the colors of the map change. All buildings disappear, and large
objects (such as surface waters or forests) and empty areas between roads become black.
However, roads and streets keep their original colors from the daytime or night color scheme
currently in use.
After leaving the tunnel, the original colors return.

■ Volume settings

You can adjust the sounds of Navigation. Touch the following switches: [Menu], [Settings],
[Sound]
Touch switch
[Voice Guidance Volume]
[Dynamic Volume]
[Dynamic Volume Settings]
61
The slider adjusts the loudness of voice prompts. At the left-end, you
cannot hear the voice guidance. At the right-end, the volume is high.
When driving at high speed, the noise in the car may be too loud to
clearly hear the voice guidance and other sounds. Using Dynamic
Volume you can instruct Navigation to increase the volume when your
speed exceeds a given minimum, and reach its highest volume at the
given maximum speed.
You can adjust a maximum and minimum speed of speed range to
volume up.
Description
61